3SUM 3 way summing / splitter box

£129.00

UK £126 including VAT and postage.

Export price £105 plus shipping (and local taxes if applicable.)

This is a very handy passive splitter box for microphone signals. Monitor live vocals in the room whilst simultaneously sending the microphone signal to a recording preamp.

Simply plug in the microphone to one end and the signal is split by a high quality Sowter transformer. The two output channels  may then be sent to separate destinations.

SKU: N/A Categories: ,

Description

This is a very handy passive splitter box for microphone signals.

Based on a box that we use for our own recordings, to monitor live vocals in the room whilst simultaneously sending the microphone signal to a recording preamp.

Simply plug in the microphone to one end and the signal is split by a high quality Sowter transformer. The two output channels may then be sent to separate destinations.

Example uses… one channel could be used to record a vocalist whist the second runs to a PA system. Or send to front of house and the main mixing board. Or even separately to a DAW and tape recording inputs. Or maybe to parallel compressors, or left and right inputs for stereo effects processing, or wet and dry recording.

Model 122 is wired with 1 x female XLR and 2 x male XLRs,  and acts as a signal splitter

Model 221 is wired with 2 x female XLR and 1 x male XLRs,  and acts as a signal summer / combiner

Technical specifications

  • Passive electronics. No power required
  • Suitable for impedances of 50 to 2000 ohms
  • 1:1:1 ratio.
  • Ground lift on channel 2 of 100 ohms.
  • Frequency range 15 Hz to >40 kHz with 200 ohm load.
  • Maximum level: +17dBu
  • Mumetal sheilding, rugged aluminium enclosure..
  • Connector: XLR3, Pin 2= +ve, Pin 3 = -ve, Pin 1 = Ground
  • Weight: 400g. Size 120 x 80 x 40 mm

Note this product is built to order.

Additional information

WeightN/A
DimensionsN/A
Model

122 splitter, 221 summer

Select your currency