Triton FetHead / AirHead

¥6,759.34¥12,553.06

The FetHead is a phantom-powered in-line booster for ribbon mics. Up to +27dB gain.

The AirHead is a -15dB attenuator plug which lets phantom power pass through.

SKU: N/A Categories: , Tags: ,

Description

FetHead is a low-noise, high quality, in-line microphone preamplifier. It provides improved sound for ribbon and dynamic microphones. The electronics are housed in a robust metal chassis with a balanced 3-pole female XLR input and a balanced 3-pole male XLR output, rugged enough for use at home, in the studio or on tour.

Which microphones benefit? (From the manufacturer’s website)

In short, we noticed an improvement on all tested microphones. A Shure SM57 for instance, sounds more responsive over a broader frequency range. When mated with a high-end dynamic microphone like a Sennheiser MD441, or Shure SM7 FetHead really shines. Ribbon microphones benefit greatly too because of a much better impedance match, which lessens the load on the microphone, giving it better transient response characteristics. FetHeads high quality, low noise signal amplification also extends the usable range of a ribbon microphone, making it more suitable for recording softer passages.

  • For Ribbon and dynamic microphones
  • Ultra low noise Class A JFet amplifier
  • 27dB’s of clean gain
  • Allows your mic to perform under “no-load” condition
  • Easy Install
  • Lowers the noise floor of your recordings
  • Sheilded enclosure
  • 4 Matched JFets

FetHead Phantom Preamp for condenser microphones

The FetHead Phantom is a low-noise, high quality, in-line microphone preamplifier, which provides improved sound for condenser microphones. The robust metal chassis houses the electronics and connects through standard balanced 3-pole XLR sockets. It is rugged enough for use at home, in the studio or on tour.

Which microphones benefit?

Triton Audio designed the FetHead Phantom especially designed for use with phantom powered condenser microphones. This makes the FetHead Phantom an indispensable tool for mobile recording and a real upgrade for camera microphone preamps, because it lowers the noise floor.

Phantom power distribution

The  circuit uses 48v phantom power, and also passes power on from its input to the microphone. As a result the phantom power supplies both the booster and the microphone.

  • Ultra low noise Class A JFet amplifier
  • 18dB amplification (@3k Ohm load)
  • 4 matched jFets
  • Shielded enclosure
  • 48V Phantom Power
  • For condenser microphones

Triton Audio AirHead In-line attenuator

A -15dB attenuator plug which lets phantom power pass through.

Additional information

Option

Triton FetHead (booster), Triton FetHead Phantom (booster), Triton AirHead (attenuator)

You may also like…

Select your currency